It’s important you know about the chlorine you use to sanitize your pool. The deal you get at a discount store might not be a deal at all. The Salt & Swim 3C salt cell produces a ton of 100% pure available chlorine – literally. Step 5: Reactivate system and check salt content, call Hayward if problems persist. Step 4: Reinstall the cell into the plumbing by threading the unions back onto the cell, be sure to make these connections only hand tight, just tight enough to allow the o-rings to seal tight enough to prevent leaking. WARNING: Hayward strongly advises anyone cleaning the cell in this manner use protective clothing and proper eye protection when working with acid – also, always add acid to water, not water to acid!!! Once done, rinse the cell off with a garden hose. This will begin to fizz, leave the cell in this solution until the fizzing subsides, usually 5-15 minutes depending on how calcified the cell may be.
If the cell needs more cleaning then just scraping, submerge the entire PVC portion of the cell into 3 parts water and 1 part murriatic acid. If present, you can either use anything NON METALLIC – wood or plastic is the safest as it should be soft enough to avoid scratching the plates, yet strong enough to break up minor deposits. Step 3: Once the cell is removed from the plumbing, look down the center at the series of plates to see if there is a white chalky build up (calcium deposits). If the unions are too tight, a strap wrench may be useful as it gives a better grip yet won’t damage the cell housing or unions. Step 2: Loosen the unions on each end of the cell, they should only be hand tight. For more information go to 1: Deactivate the pool pump to stop water flow. Rinse the cell with the garden hose and reinstall into the plumbing system.Ĭalifornia Residents WARNING: This product can expose you to Di, (2-ethylhexyl) phthalate which is known to the State of California to cause cancer and birth defects or other reproductive harm. Repeat this process until the cell is no longer bubbling with a new batch of acid and water is added.
Pour an additional mixture of acid and water into the cell. Discard the acid and water inside the cell. Allow the cell to soak in the acid and water solution until the acid stops bubbling. Then, fill the cell with a mixture of 1 part muriatic acid to 4 parts of water. Simply thread the cell cleaning stand onto your turbo cell. Use this Splash Salt Cell Cleaning Stand to keep your salt cell healthy and working properly.
Cleaning your salt cell regularly will help to maintain a reliable water flow, prevents erosion, and prevents chlorine reduction. Using this eliminates the need for a full-body soak and helps to eliminate water and acid. The Splash Salt Cell Cleaning Stand for salt cells is designed to help clean your salt cell easily and conveniently.
0 kommentar(er)
